Key points of welding operation for pe pipe
Release time:
Nov 12,2020
When installing pe pipe, if you want to weld, you should pay more attention to the details. Let's take a look at it.
In the installationpe pipeAt the same time, if you want to weld, you should pay more attention to the details. Let's take a look at it in detail.
Its connection mode will have two types: hot melt connection and electrofusion connection. The hot melt connection operation is relatively simple, and the connection mode of water supply pipe is the same, so that the technical content of electrofusion connection is higher, and the standardization of capacitor connection directly affects the later use effect. When welding, the depth of the pipe or the welding area should be marked with a marker on the pipe, and the end face of the pipe should be cut perpendicular to the axis. When cutting the pipe, the connecting end is required to be cut vertically to ensure sufficient hot melt area; high temperature is not allowed during cutting to avoid high temperature deformation.
In addition, attention should be paid to the cleaning of PE pipe joints and the insertion depth line should be marked. Fine sandpaper, scraper, etc. can be used to scrape off the oxide layer on the surface of the pipe, and clean cotton cloth should be used to wipe off the dirt on the connection surface of the pipe and the pipe, and the insertion depth line should be marked. Insert the electrofusion pipe fitting into the pipe to the specified depth, and connect the welding machine with the pipe fitting.
The Importance and Advantages of PE Pipe in Water Supply Project
2023-10-04
2023-09-24
PE pipe manufacturers how to choose? Shandong water pipe recommended
2023-09-14